Philips DVDR880 User Manual page 33

Installing your DVD recorder
2
Switch on the DVD recorder using STANDBY/ON .
3
Press the SYSTEM-MENU button on the remote control. The menu
bar appears.
4
' using D or C .
Select '
5
' using B or A and confirm with C .
Select '
6
' using B or A and confirm with C .
Select '
7
Confirm the message on the screen with OK .
the DVD recorder display.
8
Select programme number '1'
a
b If you have connected additional devices to the EXT 2 AUX I/O socket,
please disconnect these devices. Other connected devices may have
switched the TV set to the programme number of the scart socket.
9
Confirm with OK on the DVD recorder remote control.
' ' will appear on the display. The DVD recorder compares the
TV channels on the TV set and the DVD recorder.
If the DVD recorder finds the same TV channel as on the TV set it
stores it at 'P01'.
a
b Check the connectors at both ends of the scart cable.
b Check your TV's operating instructions to see which scart socket is used
for video signals.
b If the problem persists, you won't be able to use this feature.
Please read 'Sorting and clearing TV channels manually'.
0
Wait until for example '
A
Select the next programme number
B
Confirm with OK on the DVD recorder remote control.
You can delete incorrect TV channel sorting by pressing D .
C
0 B
Repeat steps to
À
To end, press SYSTEM-MENU .
.
' appears in the display.
, e.g. '2'.
until you have assigned all the TV channels.
' will appear in