Advertisement
1.0 WARRANTY INFORMATION
Patton Electronics warrants all Model 2011 components to be
free from defects, and will—at our option—repair or replace the product
should it fail within one year from the first date of shipment.
This warranty is limited to defects in workmanship or materials, and
does not cover customer damage, abuse or unauthorized modification.
If this product fails or does not perform as warranted, your sole
recourse shall be repair or replacement as described above. Under no
condition shall Patton Electronics be liable for any damages incurred
by the use of this product. These damages include, but are not limited
to, the following: lost profits, lost savings and incidental or
consequential damages arising from the use of or inability to use this
product. Patton Electronics specifically disclaims all other warranties,
expressed or implied, and the installation or use of this product shall be
deemed an acceptance of these terms by the user.
1.1 RADIO AND TV INTERFERENCE
The Model 2011 generates and uses radio frequency energy, and if
not installed and used properly—that is, in strict accordance with the
manufacturer's instructions—may cause interference to radio and
television reception. The Model 2011 is designed to provide
reasonable protection from such interference in a commercial
installation. However, there is no guarantee that interference will not
occur in a particular installation. If the Model 2011 does cause
interference to radio or television reception, which can be determined
by disconnecting the RS-232 interface, the user is encouraged to try to
correct the interference by one or more of the following measures:
moving the computing equipment away from the receiver, re-orienting
the receiving antenna and/or plugging the receiving equipment into a
different AC outlet (such that the computing equipment and receiver are
on different branches).
1.2 SERVICE
All warranty and non-warranty repairs must be returned freight
prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics
Technical Service at (301) 975-1007. Packages received without an
RMA number will not be accepted.
Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model 2011. Technical Service hours: 8AM to 5PM EST, Monday
through Friday.
1
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is
warranted for One Year parts and labor. If any questions or problems
arise during installation or use of this product, please do not hesitate to
contact Patton Electronics Technical Support at (301) 975-1007.
2.1 FEATURES
• Conforms to CCITT V.22 and V.14 standards
• Lets asynchronous terminals communicate with synchronous
modems and multiplexers
• Accepts character lengths to 11 bits
• Requires no AC power or batteries
• Supports data rates to 64 Kbps
• Automatically adjusts synchronous data rates
• Miniature size
• Plugs directly into async. or sync. DB-25 port
• Accepts external clocking
• Made in the USA
2.2 DESCRIPTION
The Patton Model 2011 asynchronous to synchronous converter
plugs directly into a local asynchronous DTE (terminal, PC, etc.) and
connects that DTE, via RS-232 cable, to a synchronous DCE. When
the same set-up is installed on the remote end, the local and remote
DTEs can communicate over the synchronous link.
Drawing power from either the synchronous or asynchronous
RS-232 interface, the Model 2011 needs no AC power or batteries to
operate and supports RS-232 data rates from 64 Kbps. Because the
Model 2011 automatically adjusts the synchronous data rate to match
the asynchronous DTE's output rate, no data rate strapping is
necessary. The Model 2011 derives clocking externally from the clock
of the synchronous DCE, and imposes no limit on data block size.
Characters may be up to 11 bits long.
Measuring only 3.2" x 2.0" x .75", the Model 2011 is housed in a
sturdy ABS plastic case. It comes fully equipped with a DB-25 male
connector and a DB-25 female connector, which plug directly into the
synchronous and asynchronous ports.
2
Advertisement
