V.35/rs-422 to hssi interface converter (24 pages)
Summary of Contents for Patton electronics 2011
Page 1
USER M A N UA L MODEL 2011 High Speed Asynchronous to Synchronous Converter SALES OFFICE Part# 07M2011-A (301) 975-1000 Doc# 062021UA TECHNICAL SUPPORT Revised 03/16/94 (301) 975-1007 http://www.patton.com...
Page 2
Return Materials Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Measuring only 3.2” x 2.0” x .75”, the Model 2011 is housed in a Technical Service at (301) 975-1007. Packages received without an sturdy ABS plastic case.
PC board, insert the blade of a small flathead screwdriver -2.5% to +1% OFF* into the slot on one side of the Model 2011’s case, then pop the case -2.5% to +2.3% open by twisting the blade. Repeat on the other side of the case. You...
4.0 INSTA L L AT I O N APPENDIX A The Model 2011 is designed to be used in pairs , with one unit PATTON MODEL 2011 SPECIFICATIONS installed between an asynchronous DTE and a synchronous DCE on either end of a synchronous communication link. Figure 3 illustrates a typical Model 2011 installation.
Page 5
Transmit Data (to 2011); data input from asynchronous port; Transmit Data (from 2011); data output to synchronous port Input to the 2011 power supply Receive Data (to 2011); data input from the synchronous port Receive Data (from 2011); data output to asynchronous port input to 2011 power supply Request to Send (to 2011);...