Appendix B - Cable Recommendations; Appendix C - Factory Replacement Parts And Accessories - Patton electronics IM1/K User Manual

PATTON K MODULE
CABLE RECOMMENDATIONS
All Patton Electronics Company Baseband Modems, CSU/DSUs
and Short Range Modem are tested to the distances published in our
Catalogs and Specification Sheets on twisted-pair cable with the fol-
lowing characteristics:
Wire Gauge Capacitance
19 AWG 83nF/mi or 15.72 pF/ft.
22 AWG 83nF/mi or 15.72 pF/ft.
24 AWG 83nF/mi or 15.72 pF/ft.
26 AWG 83nF/mi or 15.72 pF/ft.
We fully expect that the Baseband Modems, CSU/DSUs and Short
Range Modems will operate on lines with specifications different from
those tested, but to reduce the potential difficulties in the field, one
should ensure that the cable being used has similar or better charac-
teristics (lower capacitance or lower resistance).
Wire with capacitance of 20pF/ft. or less is suitable for all
Baseband Modems, CSU/DSUs and Short Range Modems. However,
distances may vary from those published in our catalog. Resistance
will also affect distance but not functionality. Wire should be 26 AWG
or larger (smaller AWG#).
Patton products are designed to withstand normal environmental
noise and conditions; however, other environmental factors too numer-
ous to discuss in this format may affect proper operation.
Selection of the proper Baseband Modem, CSU/DSU or SRM for
an application is critical to maintaining Customer Satisfaction and must
be taken seriously. Certain models are better suited for particular
applications and environments than others.
Resistance
.0163 ohms/ft.
.0326 ohms/ft.
.05165 ohms/ft.
.08235 ohms/ft.
17
K MODULE
FACTORY REPLACEMENT PARTS
AND ACCESSORIES
Patton Electronics Model #
07MIM1/K Module ...........K Module User Manual
IM1/K Module ..................K Module for use with Model 1095
IM2RC/K Module.............K Module for use with Model 1095RC
IM1RC/K Module.............K Module flip card
18
Description