Related Manuals for Patton electronics IM 1/J
Summary of Contents for Patton electronics IM 1/J
- Page 1 Voice/Data Module Part# 07MIM1J-A SALES OFFICE Doc# 090111UA (301) 975-1000 Revised 10/16/98 TECHNICAL SUPPORT (301) 975-1007 An ISO-9001 http://www.patton.com Certified Company...
-
Page 2: Radio And Tv Interference
1.2 CE NOTICE Patton Electronics warrants all IM1/J components to be free from The CE symbol on your Patton Electronics equipment indicates defects, and will—at our option—repair or replace the product should it that it is in compliance with the Electromagnetic Compatibility (EMC) fail within one year from the first date of shipment. -
Page 3: Configuring The Hardware Dip Switches
The Model IM1/J VDQM is equipped with three sets of eight DIP Thank you for your purchase of this Patton Electronics product. switches, which allow configuration of the unit to a wide variety of This product has been thoroughly inspected and tested and is applications. - Page 4 3.2.1 Setting the Electrical Interface (Switches S1 & S2) 3.2.2 Setting the DTE Rate (Switches S3-1 through S3-4) In order to make the VDQM work in your application, you must set You must also set the bit rate of the VDQM to match the bit rate of the electrical interface of the synchronous data port.
- Page 5 2) Loosen the two thumbscrews on the module by turning them counterclockwise. Figure 3. Installating the Model IM 1/J Plug-in Serial Interface Module 3) Grasp the two thumbscrews and gently pull the module from the unit. Apply equal force to the thumbscrews to keep the module...
- Page 6 4.2.2 Connecting to an FXS Voice Port (Model IM1/JS) 4.2 CONNECTING TO THE VOICE PORTS The FXS (looks like central office) ports are designed as a loop Both voice ports utilize a Data Access Arrangement (DAA) to start telephone interfaces. Each is designed to connect to a telephone interface with telephone equipment.
-
Page 7: Connecting To The Data Port
4.3 CONNECTING TO THE DATA PORT Once the VDQM is installed, it should operate transparently. This The VDQM universal interface data interface is configured as DCE sections describes FXS and FXO power-up, and general operating (Data Circuit-Terminating Equipment). It may be configured to instructions. - Page 8 5.4 FXS to FXS APPLICATIONS: 5.2 OPERATING THE SYNCHRONOUS DATA PORT Figure 6 depicts a typical FXS to FXS application. The fax The synchronous data port is a variable rate Universal DCE port. machine connected to Port 1 on Unit 1 will communicate with the FAX Since both voice ports and framing/signaling information require 64Kbs, machine connected to Port 1, Unit 2.
- Page 9 PATTON ELECTRONICS MODEL IM1/J PATTON ELECTRONICS MODEL IM1/J SPECIFICATIONS FACTORY REPLACEMENT PARTS AND ACCESSORIES Description Extended ( 0.5") "Quick Connect" module Patton Electronics Model # Description capable of providing a synchronous universal DCE data port and two loop start IM1/A.......V.24 with DB25F voice ports, either FXS or FXO.
- Page 10 PATTON ELECTRONICS MODEL IM1/J PATTON ELECTRONICS MODEL IM1/J INTERFACE PIN ASSIGNMENT INTERFACE PIN ASSIGNMENT EIA-232, EIA-422 Interface Pin Description V1 & V2 Voice Ports (UD-26 Female Connector) (RJ-11 Female Connector) (DCE Configuration) 1 (no connection) UNIVERSAL D-26 INTERFACE (DCE CONFIGURATION) 2 (no connection) 3 TIP 4 RING...