Advertisement
Quick Links
USER
MANUAL
MODEL 570-R8/570-R16
100Base-T (CAT-5)
Surge Protectors
Part #07M570/580RC-A
Doc# 074101UA
Revised 2/13/97
C E R T I F I E D
An ISO-9001
Certified Company
580-R8/580-R16
SALES OFFICE
(301) 975-1000
TECHNICAL SUPPORT
(301) 975-1007
http://www.patton.com
Advertisement
Related Manuals for Patton electronics 570-R8
Summary of Contents for Patton electronics 570-R8
- Page 1 USER MANUAL MODEL 570-R8/570-R16 580-R8/580-R16 100Base-T (CAT-5) Surge Protectors SALES OFFICE Part #07M570/580RC-A Doc# 074101UA (301) 975-1000 Revised 2/13/97 TECHNICAL SUPPORT C E R T I F I E D (301) 975-1007 An ISO-9001 http://www.patton.com Certified Company...
- Page 2 1.0 WARRANTY INFORMATION 2.0 GENERAL INFORMATION Patton Electronics warrants all Model 570/580 Rack Mount Thank you for your purchase of this Patton Electronics product. components to be free from defects, and will—at our option—repair or This product has been thoroughly inspected and tested and is replace the product should it fail within one year from the first date of warranted for One Year parts and labor.
-
Page 3: Product Applications
3.0 INSTALLATION 3.1.2 Barrier Applications (MODEL 580-Rx) Model’s 570-Rx and 580-Rx surge protectors are easy to install and are designed to operate transparently to your network. This The Model 580-Rx is a more robust protector than the Model 570- section describes connection procedures for both models. Rx, and is designed for use as a barrier protector on LAN equipment in campus networks. - Page 4 2. Install the surge protector between the incoming UTP line 4. Connect the rack structure frame directly to earth ground if it is not and the protected equipment (see Figure 4, below). This already connected. The best way to make this ground connection installation requires a straight through Cat-5 patch cable with is to attach a thick braided metal strap to earth ground, a metal modular RJ-45 male connectors .
- Page 5 APPENDIX A APPENDIX B PATTON MODEL 578R8/588 SPECIFICATIONS INTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC) COMPLIANCE Meets IEC standards 801.2, 801.4 and 801.5 (CE Mark) Environment: Category-5 Interfaces that utilize the RJ-45 connector, including RS-422, 423, 10Base- Effective January 1996 the European Economic Community will T, Token Ring, Fast Ethernet, 100Base-T, require that all electronic devices be tested and comply with all 100Base-T4 and ATM...
- Page 6 APPENDIX C APPENDIX C (continued) EIA/TIA TSB-40A COMPLIANCE TSB-40A COMPLIANCE TESTING RESULTS TYPICAL ATTENUATION MEASUREMENT The Model 570-Rx/580-Rx series surge protectors have been designed to conform to stringent EIA/TIA TSB-40 standards as required for all Category-5 connecting hardware. These standards specify the capacitance and near end cross-talk (N.E.X.T) to insure proper operation of ALL connected equipment.
- Page 7 APPENDIX C (continued) Appendix C (continued) TSB-40A Compliance Testing Results TSB-40A COMPLIANCE TESTING RESULTS TYPICAL INSERTION LOSS MEASUREMENT TYPICAL RETURN LOSS MEASUREMENT Freq. Pins: 1-2 Pins: 3-6 Pins: 4-5 Pins:7-8 Spec Pin Number: DC Resistance Milliohms 34.0 28.0 28.0 29.0 38.0 38.0 45.0...