TX Out connector PRODUCT DESCRIPTION RJ-45 connector Rx In connector The Patton Model 460 Series allow 75 Ohm coax hardware to Gaithersburg, Maryland communicate with 120 Ohm twisted pair equipment. The Model 460 Model 460 Series specifically address the ONP requirement that European PTTs G.703 Balun...
Page 3
“INSTALLATION” on page 2. The following section are converted to an unbalanced signal on the center describes configuring the Model 460. The Model 460 Series are pre-set conductor of the TX Out coax connector. to work in most applications without additional configuration. The only ·...
Plug the modular cable connector into the RJ-45 jack. Pair 2 RX In Connect the coaxial cables to the TX Out and RX In PATTON MODEL 460 SERIES SPECIFICATIONS connectors. Congratulations, you have finished installing the Model 460! Transmission Line: ITU/CCITT G.703 (unstructured)