Related Manuals for Patton electronics 400
Summary of Contents for Patton electronics 400
- Page 1 Coax to Twisted Pair Adapter (BALUN) SALES OFFICE Part# 07M400-C (301) 975-1000 Doc# 019051UC Revised 9/26/94 TECHNICAL SUPPORT (301) 975-1007 http://www.patton.com...
- Page 2 With a pair of Patton Electronics Model 400 baluns, any IBM 3270 Type A equipment can be interconnected over single-pair telephone wire at distances up to 1200 feet! This can result in significant sav-...
- Page 3 If your twisted pair cable is unterminated, follow these installation steps: Note: If the distance from the Model 400 to the wall plate is greater than 12 feet, Patton Electronics recommends that the Obtain a small flat head screwdriver. Insert the jumper cables be of 22, 24 or 26 gauge twisted pair wire, rather blade in the slot on the side of the Model 400’s case.
- Page 4 SPECIFICATIONS Connectors: Male or female BNC for RG62 A/U (93 ohm) coax connections; RJ-11/45 jack, terminal block, RJ-11/RJ-45 plug on 6 foot twisted pair pig-tail for twisted pair connection Applicable Hardware: IBM 3274 Type A controller, IBM 3178, 3278 terminals (plus other “clone” equipment) Range: 1500 feet on 22 gauge wire, 1200 feet on 24 gauge wire (lengths may vary with actual hardware used) Transmission Protocol: Transparent to user...
Need help?
Do you have a question about the 400 and is the answer not in the manual?
Questions and answers