General Information; Features; Description - Patton electronics 2701/I User Manual

G.703/g.704 ntu with 10base-t ethernet interface

Hide thumbs Also See for 2701/I:

Table of Contents

Thank you for your purchase of this Patton Electronics product. This

product has been thoroughly inspected and tested and is warranted for

One Year parts and labor. If any questions or problems arise during

installation or use of this product, please do not hesitate to contact Pat-

ton Electronics Technical Support at (301) 975-1007.

• Terminates G.703 and G.704, E1/fractional E1 service

• Available in low-cost standalone or rack-mountable versions

• n x 64 kbps data rates to 2.048 Mbps

• 10Base-T Ethernet bridge

• PPP (Point to Point Protocol, RFC 1661) with Bridge Control Protocol

(RFC 1638)

• 75-ohm dual coax and 120-ohm twisted-pair G.703 connections

• Local and remote loopback diagnostics

• Internal and G.703 network timing

• CE approval

• 90-260VAC & 48VDC power options

• Conforms to ONP requirements CTR 12 and CTR 13 for connection to

international Telecom networks

The Model 2701/I receives channelized G.704 (n x 64kbps) or clear

channel E1/G.703 (2.048-Mbps) data from the telco's digital data net-

work. The Model 2701/I terminates the G.703 telco interface and con-

verts the data for transmission to a user-oriented 10Base-T (802.3)

Ethernet interface.

The Ethernet (Model 2701/I) supports an integrated 10Base-T (802.3)

Ethernet port with transparent bridging capability for IP, IPX, DECnet,

NetBIOS and other layer-3 protocols. The 2701/I attaches to the LAN

and intelligently bridges data trafﬁc to the large central site router

through the telco's leased line network. The 2701/I supports PPP (RFC

1661) and BCP (RFC 1638).

2.0 GENERAL INFORMATION

Table of Contents