Patton electronics NetLink 2701R Specification Sheet

The Patton Model 2701R NTU terminates E1 and Fractional E1 services and provides conversion to V.35, X.21, EIA-
530 and 10Base-T Ethernet.
Wall or DIN Rail Mount
Easily installs into any environment
Connect to Any Terminal Interface
Smooth clock V.35, X.21, EIA-530, and 10Base-T
Ethernet interfaces
Connect at Any Speed
Select nx64 data channels, or 2-Mbps Clear
Channel
Eliminate Routers
Bridge Ethernet across the WAN using industry
standard PPP/BCP
Standalone or Rack Solutions
Available in desktop and high density SNMP
managed racks
Power It Anywhere
Universal input AC (100–240V) and -48 VDC
power supply options
Model 2701
Standalone and 2U-high rack card versions
are available with the same features as the
ruggedized 2701R.
NetLink™ Access Products
Ruggedized NTU
Model 2701R
O ne of the smallest and most eco-
nomical NTUs available, the Model
2701R is designed with features
usually found in more expensive units:
flexible clocking modes, AMI/HDB3 cod-
ing, V.52/V.54 diagnostics, and user-
selectable nx64 kbps data rates.
The Model 2701R series terminates
E1/FE1 services for all nx64 kbps to
2.048 Mbps rates and connects to a
router, FRAD, CODEC, or LAN with V.35,
X.21, EIA-530, or 10Base-T interfaces.
Front facing LEDs and easily accessible
switches allow for instant diagnostics
Special Rates Available
Call for Details
Model 2701RC
and service monitoring. Convenient DIP
switches support quick and concise
configuration of your E1 termination.
AC or DC power options make installing
the Model 2701R into your network
infrastructure a snap .
The wide variety of features, compact
size, and low price make Patton's
Ruggedized E1 NTUs the right solution
for your next network challenge.
Visit www.patton.com for more informa-
tion.