Power Connection; Universal Ac Power (100-240 Vac); Dc Power - Patton electronics 2701/I User Manual

5.4 POWER CONNECTION

Universal AC Power (100–240 VAC)
The Model 2701/I uses a 5VDC, 2A universal input 100-240VAC, power
supply (center pin is +5V). The universal input power supply has a male
IEC-320 power entry connector. This power supply connects to the
Model 2701/I by means of a barrel jack on the rear panel. Many interna-
tional power cords are available for the universal power supply.
The Model 2701/I powers up as soon as it is plugged into an AC outlet--
there is no power switch..

DC Power

The 36-60 VDC DC to DC adapter is supplied with the DC version of the
Model 2701/I. The black and red leads plug into a DC source (nominal
48VDC) and the barrel power connector plugs into the barrel power sup-
ply jack on the 2701/I. (See Figure 11).
To Power
Supply Jack
Barrel power connector
Figure 11. Connecting DC Power to the 2701 DC Power Supply.
WARNING
There are no user-serviceable parts in the
power supply section of the Model 2701. Con-
tact Patton Electronics Technical support at
(301)975-1007, via our web site at http://
www.patton.com, or by e-mail at support@pat-
ton.com, for more information.
20
To -48VDC
Source
-Vin
Black lead (-V)
Red lead (+V)
+Vin