Panasonic EASA-PHONE KX-T123210 Installation Manual page 77

(Page length) ,
(Skip perforation)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABa : 4 lines
k;k[ : 66 lines ....... default
Page length
The page length may be selected to position a
title and data on each page.
A page length code indicates the number of
lines per page.
A title will be printed on the first 3 lines of each
page.
I
4 lines per page
99
99 lines per page
STANDARD CONTINUOUS PAPER(ll inches)
I
paw z
66 lines z
' engtj i 1 i
.~ _____...._... ----__g.
0 T 0
0 0
0
I
0
0
machine z
g perforations 0
0
print head does not skip.
1
print head skips the last line.
2
print head skips the last 2 lines.
95
print head skips the last 95 lines.
Programming
1. Dial (24).
" SMDR Parameter" will be displayed.
2. Press the NEXT button.
" Page Length : 66" will be displayed and the
" 66" will blink.
3. Dial (4 through 99) for the page length
entry.
4. Press the MEMORY button.
The LCD will stop blinking
skip
perforation
5. Press the NEXT button.
" Skip Perf : 0" will be displayed and the " 0"
will blink.
6. Dial (0 through 95) for the skip perforation
code entry.
1
To print data, page length must be longer than
skip perforation by 4 or more lines.
7. Press the MEMORY button.
The LCD will stop blinking.
8. To return to the initial program mode, press
the END button.
Skip perforation
Programming Table
The skip perforation code indicates the number
of lines to be skipped. When the print head
reaches the line designated, the print head
moves to the top position of the next page.
See page 7-8.
3-35