Panasonic EASA-PHONE KX-T123210 Installation Manual page 161

Setting (operator only)
MESSAGE
D
Lift handset
Dial
Press
or press
extension
M ESSAG E
SP-PHONE
number
(100 Through 199)
Confirmation Hang up or
tone press
SP-PHONE
To call the operator from the extension where
the message is left.
Lift handset
or press
SP-PHONE
Press
M ESSAG E
Talk
To cancel the message at the extension where
the message is left.
Lift handset
~P~FF%NE
Dial "70s" Hang up or
press
SP-PHONE
To cancel the message which is left at the
extension from the operator.
1;;"'1/ /i;"'"'i
Lift handset
or press
SP-PHONE
Dial Press
extension
M ESSAG E
number
(100 Through 199)
Press
again
Confirmation Hang
up
or
tone press
SP-PHONE
to be informed. It will be indicated by the MESSAGE
indicator.Only the operator can leave the message
to each extension.
If the called extension is not provided with the
MESSAGE button, the operator can not leave the
message. To change the CO, or DSS button into the
message waiting button, see page 4-55 or 4-58.
Operation
Setting
1. Lift the handset or press the SP-PHONE button.
2. Dial the extension number (100 through 199).
3. Press the MESSAGE button.
A confirmation tone (one beep) will be heard.
The MESSAGE Indicator of the called party
will be lit.
4. Hang up or press the SP-PHONE button.
To call the operator from the extension where the
message is left.
1. Lift the handset or press the SP-PHONE button
2. Press the MESSAGE button.
The MESSAGE Indicator will go out.
3. Start talking
Jescription
To cancel the message at the extension where the
If the intercom extension operator has dialed is
message is left.
busy or does not answer, operator can inform the
called extension that there is a message which have
1. Lift the handset or press the SP-PHONE
button
2. Dial (708)
The MESSAGE Indicator will go out.
3. Hang up or press the SP-PHONE button.
To cancel the message which is left at the extension
from the operator.
1. Lift the handset or press the SP-PHONE
button.
2. Dial the extension number (100 through 199).
3. Press the MESSAGE button.
4. Press the MESSAGE button, again.
A confirmation tone (two beeps) will be heard.
The MESSAGE Indicator of the called extension
will go out.
5. Hang up or press the SP-PHONE button.
Conditions
0
0
4-36
This feature will not function with use of a
standard telephone.
Each extension can be received up to two
messages.
If the MESSAGE Indicator does not go out
after calling the operator, it means that
another message is left from another operator.