Panasonic EASA-PHONE KX-T123210 Installation Manual page 62

~...-....,.............,....... until the desired memory number (01 through 20) appears
_ . . . . . . . . . . . . . . . . . . . .
CDE =
area
code with 3
digits
Nothing is stored
' .....,defauIt (all 20 memory numbers)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AB= ml]
: memory number 01 for storage of an area code
memory number 20 for storage of an area code
Description
For Service Class 3 (see " Toll Restriction" on
page 3-li' ), up to 20 area codes can be selected
for use in toll dialing.
All area codes except those entered will be
denied.
All the extensions that are programmed for
Service Class Selections 3 are assigned to the
same area code selection plan.
Programming
1. Dial (14).
4. Dial the area code, using 3 digits.
l To erase a wrong entry, press the CLEAR
button.
5. Press the MEMORY button.
0 The memory indicator will be lit.
6. l
a
0
To advance to the next memory number,
press the NEXT button.
To return to the previous memory number,
press the PREV button.
To go to the desired memory number,
press the SELECT button and then dial the
memory number.
" Cls-3 Area Code" will be displayed.
2. Press the NEXT button.
" Area NO ? + " will be displayed.
3. Dial the memory number (01 through 20)
or press the NEXT button.
Example:
When dialing (01) or pressing the NEXT
button.
l The LCD will show" Area-01 :
...I'
when
nothing is stored in memory number
" 01 " .
When area code 212 has been stored,
" Area - 01 : 212" will be displayed.
3-22
7. Repeat steps 4 to 6.
8. To return to the initial program mode, press
the END button.
Programming Table.
See page 7-5.