Panasonic EASA-PHONE KX-T123210 Installation Manual page 116

:...............-
............ until the desired jack number (01 through 32) appears
i.. ........................... until the desired mode appears
Disable .......... ..default(al I 32 jack numbers)
Enable
AB= r;;l : to assign the same on all 32 jack numbers
lolli-1 : on jack number 01
m' j-5-1 : on jack number 32
Description
This feature can dial to the extension that is setting
the Do Not Disturb by programming.
Refer to " Do Not Disturb Override" on page 4-31.
Programming
1. Dial (68).
7.
8.
" DND Override" will be displayed.
Repeat steps 4 to 6, to program the
assignment of the other jack numbers.
To return to the initial program mode,
press the END button.
2. Press the NEXT button.
" Jack NO ? + " will be displayed.
3. Press the NEXT button or dial the jack
number ( 01 through 32 ).
" #Ol : Disable" will be displayed and " Disable"
-c_
jack number
will blink.
Conditions
This feature allows you to ring an extension that is
set for the " Do Not Disturb" mode.
Programming Table
See page 7-24.
4. Press the SELECT button to alternate
between " Enable" and " Disable" to select the
desired mode.
5. Press the MEMORY button.
The LCD will stop blinking.
6.
l
To advance to the next jack number,
press the NEXT button.
l
TO return to the previous jack number,
press the PREV button.
l
TO go to the desired jack number,
press the SELECT button and then dial the
jack number.
3-74