Panasonic EASA-PHONE KX-T123210 Installation Manual page 100

Programming
n
Selecting the " Normal" mode
n
Selecting the " DIL" mode
1. Dial (52).
2.
3.
" CO Night/ Mode" will be displayed.
Press the NEXT button.
" CO NO ?+" will be displayed.
Press the NEXT button or dial the CO
number (01 through 12).
" CO 01 : Normal" will be displayed and
" Normal" will blink.
4.
5.
Press the SELECT button until the " Normal"
mode is displayed.
Press the MEMORY button.
The LCD will stop blinking.
6. To advance to the next CO number,
press the NEXT button.
To return to the previous CO number,
press the PREV button.
To go to the desired CO number,
press the SELECT button and then dial
the CO number.
7.
8.
Repeat steps 4 to 6, to program the
assignment of the other CO numbers.
To return to the initial program mode,
press the END button.
1. Dial (52).
" CO Night/Mode" will be displayed.
2. Press the NEXT button.
" CO NO ?-+" will be displayed.
3. Press the NEXT button or dial the CO
number (01 through 12).
" CO 01 : Normal" will be displayed and
" Normal" will blink.
4. Press the SELECT button until the " DIL"
mode is displayed.
" CO 01 : DIL : Jack-" will be displayed.
5. Dial the jack number (01 through 32).
6. Press the MEMORY button.
The LCD will stop blinking.
7.
l
To advance to the next CO number,
press the NEXT button.
l
To return to the previous CO number,
press the PREV button.
l
To go to the desired CO number, press
the SELECT button and then dial the
CO number.
8. Repeat steps 4 to 7, to program the
assignment of the other CO numbers.
9. To return to the initial program mode,
press the END button.
Programming Table
See page 7-19.