Radio Mode - Panasonic CQ-C3400W Operating Instructions Manual

Radio
E
N
G
L
(Stereo) indicator
I
[SOURCE]
S
H
5
VOLUME
PUSH
SEL
DISC / FOLDER SCROLL
MUTE 1 2 3
1 2 3
[D . M] (Direct Memory)
Preset buttons [1] to [6]
(Preset station)
q

Radio Mode

Press [SOURCE] to select the radio mode.
Radio Mode Display
Band Frequency
w
Band
Press [BAND].
FM1
FM2
FM3
AM
e
Tuning
[[]: Higher frequency
[]]: Lower frequency
Press and hold [[] or []] for more than 0.5
seconds, then release. Seeking will start.
12
CQ-C3400/C3300/C3100W
[]] [[]
(Tune)
CQ-C3400W
OPEN
LEVEL
TUNE
TRACK
DISP DISP
RANDOM SCAN REPEAT
[DISP] (Display)
4 5 6 BAND BAND APM
4 5 6
[BAND] (APM: Auto Preset Memory)
Display Change
Press [DISP] (Display) to change the display as follows.
Band/ frequency
*Clock time
* "ADJUST" is displayed when the clock is not adjusted.
(a Page 11 for clock setting)
Direct Memory
Your favorite FM/AM radio station can be memorized in the
D·M button and you can call back the station just by
pressing the button whatever the current sound source is,
even if the power is off.
Default : FM 87.50 MHz
Direct Memory Calling
Press [D . M] (Direct Memory).
The direct memory station is received.
Direct Memory Setting
q Select a band and frequency.
w Press and hold [D . M] (Direct Memory) for more than 2
seconds.
Note:
¡ New stations overwrite existing saved stations after fol-
lowing this procedure.
Station Preset
Up to 6 stations can be stored in each of the FM1, FM2, FM3 and AM band selections.
Caution:
¡ To ensure safety, never attempt to preset stations while you are driving.
Auto Preset Memory (APM)
Automatically save stations with good reception in the pre-
set memory.
q Select a band. (a Previous page)
w Press and hold [BAND] (APM: Auto Preset Memory)
for more than 2 seconds.
The 6 stations with good reception will be automatically
saved in the memory under preset number 1 to 6.
Once set, the preset stations are sequentially scanned
for 5 seconds each. (scanning)
Note:
¡ To stop the scanning, press one of the buttons from [1]
to [6].
Note:
¡ New stations overwrite existing saved stations after following this procedure.
Preset Station Calling
q Select a band.
(a Previous page)
w Press one of the preset button from [1] to [6].
Manual Preset Memory
Manually save a station in preset memory.
q Select a band and frequency.
(a Previous page)
w Press and hold one of the preset buttons from [1] to [6]
until the display blinks once.
Preset number
CQ-C3400/C3300/C3100W
E
N
G
L
I
S
H
6
13