Table of Contents
Advertisement
Signal Menu
During "RGB" and "PC" input signal modes
Select
Mode
Sync on G
Set to "On" when the input signals from the sources connected to the COMPONENT/RGB (R,
G, B, HD and VD) input terminals and the PC input terminal are "Sync on G" signals.
H-Freq.(kHz)
Shows the horizontal scanning frequency for the video signals which are currently being
displayed (display only).
V-Freq.(Hz)
Shows the vertical scanning frequency for the video signals which are currently being
displayed (display only).
Note:
(1) The "Sync on G" setting is applied to both the COMPONENT/RGB and PC input terminals.
Set up Menu
1.Push the "Menu" Button.
2.Select the "Set up" Menu by pushing the
Position Up "F" or Down "G" Button and
Access the "Set up" Menu by pushing the
"STR" Button.
3.Select the required mode by pushing the
Position Up "F" or Down "G" buttons, and
set appropriate function by pushing the
Position Left "I" or Right "H" buttons.
Mode
COMPONENT/
Select to match the signals from the source connected to the COMPONENT/RGB input
RGB IN
terminals.
Y, P
R, G, B, HD, VD signals P "RGB"
Panasonic Auto
Set to "4:3" if using the ASPECT-AUTO button function to view 4:3 images in an unchanged
(4:3)
format. If you would like to view 4:3 images in "Just" format, set to "Just".
OSD Language
Select the on-screen display language (English/Deutsch/Français/Italiano/Español).
28
Signal
MENU
MENU
signals P "Y/PB/PR"
, P
B
R
Change
Sync on G
Off
On
H-Freq.(kHz)
31
V-Freq. (Hz)
60
Exit
Function
1,2
STR
Function
3
Set up
Access
Select
COMPONENT/RGB IN
Picture
Y/PB/PR
Sound
Panasonic Auto (4:3)
Signal
Set up
OSD Language
MENU
Exit
Change
Select
RGB
4:3
Just
English
Advertisement
Table of Contents
