— INPUT R - STANDBY G POWER ON For assistance, please call : 1-888-VIEW-PTV(843-9788) or send e-mail to : consumerproducts@panasonic.com or visit us at www.panasonic.co.jp/global/ (U.S.A) For assistance, please call : 787-750-4300 (Puerto Rico) For assistance, please call : 1-800-561-5505 or visit us at www.panasonic.co.jp/global/...
WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with The exclamation point within arrow-head within a triangle a triangle is intended to tell is intended to tell the user...
Page 3
Important Safety Instructions Power Sources This product shall be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. Unplug this apparatus during lightning storms or when unused for a long period of time.
Page 4
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Wide Plasma Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference.
How to connect the speakers ........13 (3D Y/C FILTER) ..........30 How to connect the AV Input Terminals ....... 13 COLOR SYSTEM / Panasonic AUTO ......31 How to connect the TUNER Input Terminals ....14 [SYNC] ................ 32 How to connect the COMPONENT/RGB Input Terminals ..
FCC Declaration of Conformity Matsushita Electric Corporation of America Responsible Party: One Panasonic Way Secaucus. NJ 07094 1-800-528-8601 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Safety Precautions WARNING Set up Do not place the Wide Plasma Display on sloped or unstable surfaces. • The Wide Plasma Display may fall off or tip over. Do not place any objects on top of the Wide Plasma Display. •...
Safety Precautions CAUTION This Wide Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.) Speakers ...........
Accessories Accessories Supplied Check that you have the Accessories and items shown Operating Instruction book Remote Control Transmitter Batteries for the Remote EUR646525 Control Transmitter (AA(R6) Battery INPUT SURROUND PICTURE SOUND SET UP PICTURE POS. /SIZE ASPECT OFF TIMER PLASMA DISPLAY Warranty RCA/BNC Adapter Plug Ferrite core...
Remote Control Batteries Requires two AA batteries. 1. Turn the transmitter face down. 2. Install the batteries as shown in 3. Replace the cove and slide in Press and slide off the battery the battery compartment. reverse until the lock snaps. cover.
Basic Controls — INPUT R - STANDBY G POWER ON TH-42PW3 Main Power On/Off Switch Volume Adjustment Input button Push the Volume Up “+” or (VIDEO (S-VIDEO)/COMPONENT, Power Indicator Down “–” button to RGB/PC Mode Selection) The Power Indicator will light.
Connections SPEAKER Terminals (L) SPEAKER Terminals (R) – Cable fixing bands Secure any excess cables with bands, as required. To tighten: To loosen: Push the knob Pull Pull From TUNER signal out Terminal (see page 14) From EXIT monitor Terminal From SERIAL Terminal on Computer on Computer (see page 16) (see page 17)
Connections How to connect the speakers When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker’s Installation Manual for details on speaker installation. Speakers (Optional accessories) How to connect the AV Input Terminals Connect the signal source equipment (see pages 14 to 17).
Connections How to connect the AV Input Terminals VIDEO signal connection (VCR) Audio Video Video input to BNC socket VIDEO BNC video cable AUDIO 2 RCA audio cables Audio input to L/R sockets (VCR) AUDIO VIDEO S-VIDEO Audio Video AV IN Video input to BNC socket VIDEO...
Connections How to connect the COMPONENT/RGB Input Terminals Component signals (Y, P ) connection DVD Player AUDIO Audio DVD (Y,P ) OUT COMPONENT/RGB IN BNC-RCA adapter plug (not supplied) Video input to Y, P sockets Y, P 3 BNC video cables AUDIO 2 RCA audio cables Audio input to L/R sockets...
Connections How to connect the PC Input Terminals COMPUTER AUDIO PC IN — POWER R - STANDBY INPUT G POWER ON Conversion adapter (if necessary) D-sub 15p PC cable Less than Ferrite core 7" (20 cm) Audio 1/8" (3mm) stereo plug Connect a cable which matches the audio output terminal on the computer.
None this unit before sending the next command. NORMAL (4:3) NORM (2) If an incorrect command is sent by mistake, this unit ZOOM ZOOM will send an “ER401” command back to the computer. FULL FULL JUST JUST Panasonic AUTO SELF...
LANGUAGE selection screen is displayed. From the second time on, language selection can be done from the setup menu. (see page 21) R - STANDBY G POWER ON TH-42PW3 Select the desired language using the keys and press the store button.
Power ON/OFF and Input Signal Selection Select the Input Signal INPUT Press the INPUT button to select the input video signal desired from equipment such as a VCR which has been connected to the Wide Plasma Display. Input signals will change as follows: For COMPONENT INPUT (see page 30) —...
On-Screen Menu Display from Remote Control To PICTURE adjust menu (see page 28) PICTURE NORMALIZE NORMAL PICTURE MENU STANDARD PICTURE BRIGHTNESS COLOR TINT INPUT SHARPNESS COLOR TEMP NORMAL SURROUND NORMALIZE ADJUST RETURN SELECT To SOUND adjust menu (see page 26) PICTURE SOUND SET UP...
(see page 31) [ VIDEO ] SIGNAL 3D Y/C FILTER ( NTSC ) COLOR SYSTEM AUTO Panasonic AUTO ( 4:3 ) NORMAL To SIGNAL screen for RGB Press to select “SIGNAL” (see page 32) menu. To SET UP menu (see page 30)
PICTURE SOUND SET UP For a 525i (480i), 625i (575i) signal input during “Component” input signal mode, “Panasonic Auto” can not be selected. (4) The aspect mode is memorized separately for each input terminal PICTURE (VIDEO, COMPONENT, RGB and PC).
Page 23
Note: For an elongated image Image is expanded Panasonic Panasonic AUTO mode is designed to automatically AUTO adjust the aspect ratio to handle a mix of 16:9 and 4:3 Changes in accordance program material. Certain 4:3 program material, such...
Adjusting PICTURE POS./SIZE Adjusting screen ASPECT Press to select the screen mode to adjust (see page 23). INPUT SURROUND PICTURE POS. /SIZE Press to display the PICTURE POS./ SIZE menu. Press to select H-POS/H-SIZE/V-POS/ V-SIZE/CLOCK PHASE. PICTURE SOUND SET UP PICTURE During “VIDEO”...
Page 25
Adjusting PICTURE POS./SIZE When the Position Left “ ” button is pressed When the Position Right “ ” button is pressed H-POS When the Position Left “ ” button is pressed When the Position Right “ ” button is pressed H-SIZE When the Position Left “...
SOUND Adjustment Press the SOUND button to display the SOUND menu. Select to adjust each item. INPUT Press to select the desired adjustment menu. SURROUND Select the desired level by listening to the sound. PICTURE SOUND SET UP PICTURE POS S BASS Adjusts low sounds SOUND...
SURROUND Controls SURROUND SURROUND Button The benefits of surround sound are enormous. You can be completely enveloped in sound; just as if you were at a concert hall or cinema. The surround setting switches on and off each time the SURROUND button is pressed.
PICTURE Adjustments PICTURE PICTURE Press the PICTURE button on the NORMALIZE NORMAL Remote Control to display the PICTURE MENU STANDARD PICTURE menu. PICTURE BRIGHTNESS COLOR TINT Select to adjust each item. SHARPNESS COLOR TEMP NORMAL Press to select the menu to adjust. NORMALIZE ADJUST RETURN...
Page 29
PICTURE Adjustments Notes: Item Effect Adjustments (1) “COLOR” , “TINT” and “SHARPNESS” Selects the proper brightness and settings cannot be adjusted for “RGB” PICTURE density for the room. and “PC” input signal modes. Less More (2) You can change the level of each Adjusts for easier viewing of dark pictures BRIGHTNESS function (CONTRAST, BRIGHTNESS,...
ENGLISH ( US ) OSD LANGUAGE Press to set ON/OFF. RETURN SELECT Press (store) button [ VIDEO ] SIGNAL 3D Y/C FILTER ( NTSC ) COLOR SYSTEM AUTO Press to exit from adjust mode. Panasonic AUTO ( 4:3 ) NORMAL CHANGE RETURN SELECT...
AUTO SECAM M NTSC NTSC Pansonic AUTO Set to “NORMAL” to view 4:3 images in an unchanged format when (4:3) Panasonic AUTO is selected. If you would like to view 4:3 images in “Just” format, set to “JUST”.
SET UP for Input Signals Select SIGNAL from the “SET UP” menu during RGB or PC input signal mode. [ RGB ] SIGNAL Press to select each item. SYNC H & V PULL-IN RANGE NARROW CLAMP POSITION H-FREQ. 31.5 Press to adjust. V-FREQ.
Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Checks Picture Sound Electrical Appliances Cars/Motorcycles Fluorescent light Interface Noisy Sound Volume (Check whether the mute function has been activated on the remote control.) Normal Picture No Sound Not plugged into AC outlet...
Specifications TH-42PW3 Power Source 120 V AC, 50/60 Hz Power Consumption Normal use Max. Amps 4.0 A Stand-by condition 1.9 W Power off condition 0.7 W Plasma Display panel Drive method AC type 42-inch, 16:9 aspect ratio Contrast Ratio 3000:1...
Page 36
Division of Matsushita Electric 5770 Ambler Drive Electric Corporation of America of Puerto Rico Inc. (“PSC”) Mississauga, Ontario One Panasonic Way Secaucus Ave. 65 de Infanteria, Km 9.5 L4W 2T3 New Jersey 07094 San Gabriel Industrial Park, Carolina, Puerto Rico 00985...