Basic Menu Operations (Main Menu, Set-Up Menu); Main Menu - Panasonic BTH1700BP - IND. MONITOR Operating Instructions Manual

BASIC MENU OPERATIONS
(MAIN MENU, SET-UP MENU)
ABOUT MENU SCREENS
This monitor features a MAIN MENU (main menu screen) and a SET-UP MENU (setup menu screen).
The MAIN MENU contains the functions normally used, and the SET-UP MENU contains the settings required for initial setup.

"MAIN MENU"

Items
1 APERTURE CONTROL
2 SLOT CONDITION
3 sub menu POSI.
4 AREA MARKER
5 COLOR MATRIX
About "Displays" *1 : Not displayed when an RGB signal is input.
*2 : Displayed only when the screen ratio is 16:9. Not displayed when an RGB signal is input.
When some items are not displayed depending on the input signals, subsequent items will move up.
Position of the menu varies depending on the type of signal.
"SET-UP MENU"
Items
1 FUNCTION SETTING
2 PICTURE SUB ADJ.
3 COLOR TEMP./BAL.
4 SIZE/POSI. ADJ.
5 DISTORTION ADJ.
6 STATUS DISPLAY
7 CONTROL LOCK
8 all reset
BUTTONS FOR MENU OPERATIONS
MUTING
VOLUME
Functions
Compensates the frequency characteristics of the input video signal.
Displays the status of the input cards installed in each of the input card slots.
Selects the display position of the sub menu superimposed on the screen.
Controls ON/OFF and other settings of the MARKER SELECT, SAFETY MARKER,
and ZOOM functions included in the AREA MARKER function.
Selects or adjusts the picture color matrix.
Functions
Selects the control systems for the COLOR SYSTEM, synchronized signal, RUSH DELAY TIME,
tally lamp colors, and MAKE/TRIGGER terminal.
* Checks the amount of time that the monitor has been used.
* Selects the audio channel group for the EMBEDDED AUDIO. (When an input card compliant with EMBEDDED AUDIO is installed.)
Controls the approximate adjustment of the video control level when the video adjustment knob is
adjusted to the center.
* Can also be used to switch the NTSC set-up level, and change the component signal's input level settings.
Sets or adjusts the color temperature or white balance.
Adjusts the size or position of the picture.
Compensates the picture distortion.
Sets the status display ON/OFF.
* Switches the display on and off. Also selects the type of display.
Sets the control lock preventing the monitor from misuse.
Sets all items in SET-UP MENU to factory-preset values.
UNDER PULSE COLOR
DEGAUSS SCAN CROSS OFF POWER
SLOT 1 SLOT 2 SLOT 3
A B C D E F
INPUT SELECT
MENU SCREENS ASPECT AREA
CHECK MARKER
MUTING DEGAUSS
MENU
MENU
VOLUME
Displays
*1
*2
*1
11