Table of Contents
Advertisement
Signal Menu
1.Push the "Menu" Button.
2.Select the "Signal" Menu by pushing the
Position Up "F"or Down "G" Button and
Access the "Signal" Menu by pushing the
"STR" Button.
3.Select the required mode by pushing the
Position Up "F" or Down "G" buttons, and
set the appropriate function by the Position
Left "I" or Right "H" buttons.
Note:
(1) The "Signal" screen changes depending on the input signal mode (AV(S-Video), Component, RGB or PC).
During "AV(S-Video)" input signal mode
Select the mode
Select the function
Mode
Colour system
Set the colour system to match the input signal. If set to "Auto", the colour system is
determined automatically.
Auto
Scan mode
During "Component" input signal mode
Select
Mode
Colour matrix
If the output signals from the source connected to the COMPONENT/RGB input terminals are
in 525p (480p) format, the colours in the images from this source will be set to their natural
colours.
MENU
Note:
NTSC
(1)The display colour for the input signal mode ("AV") changes
SECAM
PAL
(2) PAL-60 signal is displayed only
If watching a normal image, select the "Field".
Field
If the recording mode used for a device such as a digital video camera is
Frame
"Frame", select the "Frame" to obtain a higher-quality playback image.
1,2
STR
Signal
Change
Select
Colour system
Auto
Scan mode
Field
MENU
Exit
Function
according to the colour system
setting.
Auto - Green
NTSC - Magenta
PAL - Yellow
SECAM - Cyan
"Auto" mode.
Signal
Change
Colour matrix
1
2
MENU
Exit
Function
3
Signal
Access
Select
Colour system
Picture
Sound
Scan mode
Signal
Set up
MENU
Exit
During "AV(S-Video)" input
signal mode
Change
Select
Auto
Field
AV
27
Advertisement
Table of Contents
