Adding Or Changing Access Points; Registering Access Point - Panasonic Lumix DMC-TZ50 Operating Instructions Manual

Applications
Public LAN access points may be added, but please note that successful internet
connection with this camera via non-T-Mobile services cannot be guaranteed.
When using a wireless LAN router, please use one that is compliant with either the IEEE
802.11g or the IEEE 802.11b standard.
First, register your access point, then select it from the list to connect.
For information security reasons, we strongly recommend making encryption settings on your router
when using a home wireless LAN. Fixed IP address settings cannot be made on the camera itself.
You can register up to eight access points, including the 'tmobile' which comes preset.
Depending on the setting of the access point used, the screen requiring no settings may
not be displayed.
Check with your provider or network administrator if you do not know the 'SSID' (network
name), 'network certification' or 'encryption key.'
1
Entering Wi-Fi mode (P.10)
2
Select 'Wi-Fi SET'
3
Select 'ACCESS POINT SET'
• To return:
4
Select 'OTHER ACCESS POINT'
• To return:
30
VQT1R37
4
Adding or changing access
points

Registering access point

Press [Q.MENU/ ]
Press [Q.MENU/ ]
5
Selecting an access point
Signal strength (P.15)
• To return: Press ◄
• To scan again:
Press [DISPLAY]
• To change page:
Turn zoom lever
If the access point to be registered
on the list is not displayed, select
' MANUAL INPUT.'
• The signal strength display reflects
the strength status when the access
point was detected: as such, it may
not reflect the current strength. To
check the current signal strength,
press [DISPLAY], and search the
access point again.
Unregistered
Registered
( PUBLIC
Wi-Fi LAN)
( HOME
Wi-Fi LAN)