Connect To Web Album - Panasonic Lumix DMC-TZ50 Operating Instructions Manual

3
Basics
This page explains how to connect to your web album using T-Mobile HotSpot locations (P.4).
See http://hotspot.t-mobile.com (correct as of April 2008) for a list of T-Mobile HotSpot locations.
See P.26 if using a T-Mobile @Home branded wireless router, or P.30 if adding or
changing access points.
1
Entering Wi-Fi mode (P.10)
Select 'WEB ALBUM'
2
The T-Mobile HotSpot (tmobile) already registered at the time of purchase is displayed.
Select 'tmobile'
3
Displays
signal
strength
during
connection
Connection is made with your web album, and the web album menu (P.16) is
displayed.
During transmission, do not remove or insert card or battery, turn off camera
power, or move camera outside of area possible for transmission.
If you cannot connect with your album, the signal strength may be weak, the user ID
for the access point may have expired or some other such factor may be to blame. For
details, refer to 'Message displays' (P.41) or 'Q&A' (P.43).
To disconnect (P.21)

Connect to web album

Wi-Fi menu
The signal strength is displayed.
Out of service area Weak
The signal strength display reflects the strength status when
the access point was detected: as such, it may not reflect the
current strength. To check the current signal strength, press
[DISPLAY], and search the access point again. (Communication
may take longer if the signal strength is weak.)
• To return: Press [Q.MENU/ ]
Strong
When using public
wireless LAN only
15
VQT1R37