Main Menu 1 Of 2 (Main Menu) - Panasonic DVCPRO AJ-D410AP Operating Instructions Manual

Menu contents
SCENE MENU (main menu)
PROCESS
Setting
Item
options
H DETAIL –10 For setting the amount of detail in the
: horizontal direction.
+00
:
+10
V DETAIL –06 For setting the amount of detail in the
: vertical direction.
+00
:
+10
DTL CORING –2 For setting the amount of detail coring.
:
+0
:
+8
H.DTL FREQ. 2MHz For setting the detail boost frequency in the
3MHz horizontal direction.
4MHz
MATRIX A For selecting the color compensation matrix
B table.
ADJ A:
B:
ADJ:Changes to the MATRIX value set for
CHROMA LEVEL –2 For setting the chroma level.
:
+0
:
+2
CHROMA PHASE –31 For setting the chroma phase.
: The skin tone takes on a reddish tinge in
+00 the "+" direction.
:
+31
MASTER PED –26 For setting the master pedestal level.
:
+00
:
+26
KNEE POINT 90% For setting the knee point position.
:
100%
WRITE For saving the data.
ADDITIONAL PROCESS
Setting
Item
options
MATRIX ADJ.R-G +00 For adjusting the color. Hue and chroma
R-B +00 are adjusted. This is effective when ADJ
G-R +12 has been selected for the "MATRIX" item of
G-B +00 <PROCESS>. The MATRIX table can be
B-R +00 adjusted/set as desired.
B-G +00
WRITE For saving the data.
Remarks
Standard setting
For shooting under fluorescent lighting.
<ADDITIONAL PROCESS>.
Remarks

MAIN menu 1 of 2 (main menu)

#N E X T ¢¢¢¢ MAIN 1/2 ¢¢¢¢
D A T A R E A D / W R I T E . .
S W M O D E . .
V I D E O I N / O U T . .
V T R F U N C T I O N . .
V T R O P T I O N . .
B A T T E R Y . .
M I C / A U D I O . .
L E N S S H A D I N G . .
DATA READ/WRITE
Setting
Item
options
FILE SELECT 1/2/3/4
SW MODE
Setting
Item
options
LOW GAIN 0dB
:
36dB
MID GAIN 0dB
:
9dB
:
36dB
HIGH GAIN 0dB
:
18dB
:
36dB
ATW PRE
Ach
Bch
OFF
SUPER V ON
OFF
QUICK FOCUS ENABLE
DISABLE
FULL AUTO ENABLE
DISABLE
SCENE FILE ENABLE
DISABLE
" " indicates the factory setting.
34
Remarks
For storing the menu setting parameters in
the memory. For further details, refer to
"How to use file select." (page 26)
Remarks
For setting the gain allocated to the LOW
GAIN switch.
A setting from 0 to 36 dB can be selected.
For setting the gain allocated to the MID
GAIN switch.
A setting from 0 to 36 dB can be selected.
For setting the gain allocated to the HIGH
GAIN switch. A setting from 0 to 36 dB can
be selected.
For setting at which WHITE BAL switch
position the full time auto white balance
mode is to be enabled.
PRE:ATW is enabled at the PRE position.
Ach: ATW is enabled at the Ach position.
Bch: ATW is enabled at the Bch position.
OFF:Full time auto balance
performed.
For selecting the vertical high-resolution
mode. This item does not work when the
AJ-EC3P is used.
For enabling or disabling the quick focus
function.
For enabling or disabling the full auto
function.
For enabling or disabling the scene file
function.
ENABLE: The scene file function
enabled.
DISABLE: The scene file function
restricted to the user files.
is not
is
is