Panasonic DVCPRO AJ-D410AP Operating Instructions Manual page 17

Viewfinder displays
Display item
1 Extender display EX
iREC
2 INTERVAL REC
status display
TCG
3 Time code display
TCR
ETC
UBG
UBR
EUB
CNT
4 Center marker +
5 1st line message AWB Ach ¢.¢K
display (changes in AWB Ach ¢.¢K UNDER
switch settings)
AWB Ach ¢.¢K OVER
AWB Bch ¢.¢K
AWB Bch ¢.¢K UNDER
AWB Bch ¢.¢K OVER
AWB PRE ¢.¢K
AUTO KNEE ON
AUTO KNEE OFF
GAIN ¢¢dB
FILTER ¢
SHUTTER OFF
SHUTTER 1/¢¢¢¢
IRIS MODE ¢¢¢¢
FULL AUTO ON
FULL AUTO OFF
SCENE FILE USER
SCENE FILE 1
SCENE FILE 2
SCENE FILE 3
SCENE FILE 4
SCENE FILE STD
(AWB, ABB operation AWB ACTIVE
displays) AWB OK ¢.¢K
AWB OK ¢.¢K UNDER
AWB OK ¢.¢K OVER
AWB NG
AWB PRE
ATW MODE
ABB ACTIVE
ABB OK
ABB NG
5 2nd line message color temp LOW
color temp HIGH
display
(error result message LEVEL OVER
LOW LIGHT
displayed after AWB
or ABB has been UNSTABLE CONDITION
TIME OVER
performed)
SPOT
6 IRIS MODE switch
status display BACK
QUICK FOCUS
7 QUICK FOCUS
display
What is displayed
12:59:59:29
12:59:59:29
12:59:59:29
AB:CD:EF:00
AB:CD:EF:00
AB:CD:EF:00
01:59:59:29
Status causing the display to appear
Displayed when the lens extender is being used.
Indicates the interval recording mode.
"INTERVAL REC function" (page 30).
Indicates the TCG (time code generator) value.
Indicates the TCR (time code reader) value.
Indicates the ETC (slave-locked time code) value.
Indicates the UBG (user's bit generator) value.
Indicates the UBR (user's bit reader) value.
Indicates the EUB (slave-locked user's bit) value.
Indicates the CTL-COUNTER value.
Displayed when ON is selected as the CENTER MARK setting (see page
37). It indicates the center of the viewfinder screen.
Displayed when the AWB has been attained for channel A.
Displayed when the AWB has been attained for channel A, and the color
temperature is lower than the display range.
Displayed when the AWB has been attained for channel A, and the color
temperature is higher than the display range.
Displayed when the AWB has been attained for channel B.
Displayed when the AWB has been attained for channel B, and the color
temperature is lower than the display range.
Displayed when the AWB has been attained for channel B, and the color
temperature is higher than the display range.
Displayed when AWB has been switched to PRE.
Displayed when AUTO KNEE has been changed from OFF to ON.
Displayed when AUTO KNEE has been changed from ON to OFF.
Displayed when the gain has been switched.
Displayed when the filter has been switched.
Displayed when the shutter has been set to OFF.
Displayed when the shutter has been set to ON.
Displayed when the IRIS MODE switch setting has been changed.
Displayed when FULL AUTO has been changed from OFF to ON.
Displayed when FULL AUTO has been changed from ON to OFF.
Displayed when the scene file dial setting has been switched.
Displayed while the AWB operation is in progress.
Displayed when AWB is completed error-free.
Displayed when AWB is completed error-free, and the color temperature is
outside the display range (under ¢.¢K).
Displayed when AWB is completed error-free, and the color temperature is
outside the display range (over ¢.¢K).
Displayed when AWB is completed with an error.
Displayed when AWB cannot be performed because AWB is set to PRE.
Displayed when ATW (full time auto white balance) is in progress.
Displayed while the ABB operation is in progress.
Displayed when ABB is completed error-free.
Displayed when ABB is completed with an error.
Warns that the color temperature is too low during the AWB operation.
Warns that the color temperature is too high during the AWB operation.
Warns that the brightness is too high during the AWB operation.
Warns that the brightness is too low during the AWB operation.
Warns that the screen is not stable during the AWB or ABB operation.
Warns that the AWB or ABB processing could not be completed within the
allotted time.
Displayed when the IRIS MODE switch is at the SPOT.L position.
Displayed when the IRIS MODE switch is at the BACK.L position.
Displayed when QUICK FOCUS is ON.
17
For further details, refer to