Bluetooth Module; Launch Board; Fingerprint Scanner - Packard Bell EasyNote BU Series Disassembly Manual

Bluetooth Module

1. Remove the top cover as described under ' Top Cover' .
2. The Bluetooth module is located to the front in the bottom cover.
3. Disconnect the cable and lift out the module.

Launch Board

This contains the power button, WiFi button and ECO button.
1. Remove the top cover as described under ' Top cover' .
2. The launch board is mounted in the top cover.
3. Disconnect the cable from the launch board.
4. Remove these two screws.
5. Lift out the launch board.

Fingerprint Scanner

1. Remove the top cover as described under ' Top Cover' .
2. The fingerprint scanner is located in de touchpad on the top cover.
Fig. 20 The launch board.
EasyNote BU Disassembly Manual 15