Packard Bell EasyNote BU Series Disassembly Manual page 20

4. Remove the LCD bezel clicked in place. Note that the bezel may be
glued on the top side (at the webcam and microphone). A bit of force
may be needed to pull the bezel loose.
5. Disconnect the power cable from the inverter board.
Fig. 28 The inner works of the LCD assembly.
6. Remove the four screws from the hinges (two at each side).
7. Lift out the LCD panel.
EasyNote BU Disassembly Manual
Fig. 27 The LCD assembly.
20