3. Delete all or disable all entries if there are any entries already.
4. Click the Add New... button.
1)
Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-07-5F in the MAC Address field.
2)
Enter wireless station A/B in the Description field.
3)
Select Enabled in the Status pull-down list.
4)
Click the Save button.
5)
Click the Back button.
The filtering rules that configured should be similar to the following list:
4.7.4
Wireless Advanced
Choose menu "Wireless → Wireless Advanced", and then you can configure the advanced
settings of your wireless network.
Beacon Interval - Enter a value between 20-1000 milliseconds for Beacon Interval here.
The beacons are the packets sent by the Router to synchronize a wireless network. Beacon
Interval value determines the time interval of the beacons. The default value is 100.
RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the packet
is larger than the specified RTS Threshold size, the Router will send RTS frames to a
TL-WR743ND
Figure 4-30 Wireless Advanced
- 74 -
150Mbps Wireless AP/Client Router