TP-Link TL-WR743ND User Manual page 37

Channel - This field determines which operating frequency will be used. The default channel

is set to 6. It is not necessary to change the wireless channel unless you notice interference
problems with another nearby access point.
Wireless Security Mode - You can select one of the following security options:

 Most Secure(WPA/WPA2-PSK) - Select WPA based on pre-shared passphrase.
 Secure（WEP）- Select WEP based on none pre-shared passphrase.
 No Security - The wireless security function is disabled. The wireless stations will
be able to connect the Device without encryption.
Wireless Password - Enter an 8 to 63 character alphanumeric pass-phrase. For good

security it should be of enough length and should not be a commonly known phrase.
These settings are only for basic wireless parameters. For advanced settings, please refer to
Section 4.7 Wireless.
Click Survey button on the Wireless Bridge Setting page as shown in Figure 3-26, and then AP
List page will appear as shown in Figure 3-27. Find the SSID of the Access Point you want to
access, and click Connect in the corresponding row. For example, the first item is selected. The
target network's SSID will be automatically filled into the corresponding box which is shown as the
Figure 3-28.
TL-WR743ND 150Mbps Wireless AP/Client Router
Figure 3-27 AP List
- 28 -