TP-Link TL-WR743ND User Manual page 27


Note:
If you know the SSID of the desired AP, you can also input it into the field "Wireless Name of
WISP Station" manually.
4. Click the Next button in Figure 3-12, the Local Wireless AP Setting page will appear as below.
Local Wireless Name - Enter a string of up to 32 characters. The same Name (SSID) must

be assigned to all wireless devices in your network. The default SSID is set to be TP-LINK
_xxxxxx(xxxxxx indicates the last unique six characters of each Device's MAC address),
which can ensure your wireless network security. But it is recommended strongly that you
change your networks name (SSID) to a different value. This value is case-sensitive. For
example, MYSSID is NOT the same as MySsid.
5. Click the Next button in Figure 3-13. You will then see the page as shown in Figure 3-14.
Please click the Reboot button to make your configuration take effect and finish the Quick
Setup.
TL-WR743ND
Figure 3-12
Figure 3-13 Local Wireless AP Setting
- 18 -
150Mbps Wireless AP/Client Router