Alarm Sending - TP-Link TL-SC3130 User Manual

characters standing for the sensor type added to the subject.
Message: Type the text of the E-mail up to 384 characters. (A line break is equivalent to 2
characters.)

7.2.2 Alarm sending

Set to send the mail with connection to the alarm detection by the built-in motion detection
function. Select On to send the image and file to SMTP server linked with the alarm detection.
Alarm sending: Select On to set to send mail with connection to the alarm detection.
File attachment: Set whether an image file is attached to the mail sent or not. When On is
selected, the image file made by the settings below is attached. When Off is selected, only
the message is sent.
Image file name: Type the file name you want to assign to the image to attach a mail. You
can use up to 10 alphanumeric, - (hyphen) and _ (underscore) for naming.
Suffix: Select a suffix to add to the file name
Date & time: The date & time suffix is added to the Image file name. The date/time suffix
consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits), hour (2
digits), minute (2 digits), second (2 digits), and consecutive number (2 digits), thus 14-digit
number is added to the file name.
Sequence number: A consecutive number of 10 digits between 0000000001 and
4294967295 and two fixed digits 00 is added to the Image file name.
Sequence number clear: Click Clear and the suffix of the sequence number returns to 1.
52