Dhcp Clients List; Address Reservation - TP-Link TL-R480T+ User Manual

Secondary DNS - Input the IP address of another DNS server if your ISP provides two DNS
servers. (Optional)
Note:
To use the DHCP server function of the router, you must configure all computers on the LAN as
"Obtain an IP Address automatically" mode. This function will take effect until the router reboots.
4.4.2

DHCP Clients List

Choose menu "DHCP→DHCP Clients List", you can view the information about the clients
attached to the router in the next screen (shown in Figure 4-19). Click the Refresh button to
update the information.
Client Name - This field displays the name of the DHCP client
MAC Address - This field displays the MAC address of the DHCP client
Assigned IP - This field displays the IP address that the router has allocated to the DHCP
client.
Lease Time - This field displays the time of the DHCP client leased. Before the time is up,
DHCP client will request to renew the lease automatically.
4.4.3

Address Reservation

Choose menu "DHCP→Address Reservation", you can view and add reserved addresses for
clients via the next screen (shown in Figure 4-20).
If you specify a reserved IP address for a PC on the LAN, that PC will always receive the same IP
address each time when it accesses the DHCP server. Reserved IP addresses should be
assigned to servers that require permanent IP settings.
TL-R480T+ Load Balance Broadband Router User Guide
Figure 4-19
Figure 4-20
39