Domain Filtering - TP-Link TL-R480T+ User Manual

Note:
Before adding an IP Address Filtering entry, you should enable the Firewall and the IP Address
Filtering function first (shown in Figure 4-31).
Other configurations for the entries as shown in Figure 4-32:
Click the Delete button to delete the entry.
Click the Enable All button to enable all the entries.
Click the Disable All button to disable all the entries.
Click the Delete All button to delete all the entries.
Click the Previous button to view the information in the previous screen, click the Next button to
view the information in the next screen.
4.6.3

Domain Filtering

Choose menu "Security→Domain Filtering", you can configure the Domain filtering rule in the
next screen (shown in Figure 4-35). The Domain Filtering feature allows you to control access to
certain websites on the Internet by specifying their domains or key words.
Default Filtering Rules - Here displays the default rule of domain filtering, which can be
changed on the Firewall page.
•
Deny to access websites specified by rules: This rule determines that the websites
specified by rules are not permitted to access, but the other websites can be accessed
normally.
•
Allow to access websites specified by rules: This rule determines that only the
websites specified by rules can be accessed, but the other websites are not permitted to
access.
Effective Time - This is the time or the range of time for the entry to take effect. For example,
0800 - 2400, it means that the entry will take effect from 08:00 to 20:00.
TL-R480T+ Load Balance Broadband Router User Guide
Figure 4-35
50