TP-Link TL-WA701ND User Manual page 33

II. By PIN
If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the
network by PIN with the following two methods.
Method One: Enter the PIN into my AP
Step 1: Keep the default WPS Status as Enabled and click the Add device button in Figure 4-5,
then the following screen will appear.
Step 2: Choose "Enter the new device's PIN" and enter the PIN code （take 16952898 for
example） of the wireless adapter in the field after PIN as shown in the figure above. Then
click Connect.
Note:
The PIN code of the adapter is always displayed on the WPS configuration screen as shown in the
following figure.
Step 3: For the configuration of the wireless adapter, please choose "Enter the PIN of my
access point or wireless router." in the configuration utility of the WPS as below, and
click Next.
TL-WA701ND
The WPS Configuration Screen of Wireless Adapter
Figure 4-7 Enter the PIN
150Mbps Wireless N Access Point User Guide
25