DSC SYSTEM MASTER PC4000 Instruction Manual page 13

KEYPAD SETUP
[ ]+[6]+[ACCESS CODE]+[3]
This function allows the user to adjust the backlighting and contrast of the LCD-4500
keypad. When this function is selected, the Keypad Setup menu will appear on the
keypad.
Bright Control adjusts the level of back lighting on the LCD display and the
backlighting on the keys.
Contrast Control adjusts the contrast of the lettering on the LCD display.
Use the [<][>] keys to toggle through the eight different settings, and press [ ] to
select the level of preference.
BELL/COMM TEST
[ ]+[6]+[ACCESS CODE]+[4]
This option allows the end user to test the system. This option activates the bell's for
two seconds and sends a test code transmission to the monitoring station.
DOOR CHIME
[ ]+[6]+[ACCESS CODE]+[5]
The Door Chime feature is enabled or disabled by pressing the [ ] key to toggle from
"N" to "Y" or "Y" to "N". When the chime zone is activated, the keypad will beep
quickly 5 times. The "Beeping" on doors can be eliminated temporarily by using zone
bypass, only when the panel is disarmed.
SPEC. MESSAGES
[ ]+[6]+[ACCESS CODE]+[6]
This function enables two special event messages to be displayed when one of the
special events occurs.
The first message is "Fail to Arm". It will be displayed if the user is unable to arm the
partition after entering a valid code (E.g. Because of activity on the zones.).
The second message is "Alarm When Armed". It will be displayed if an alarm
occurred during the previous armed period.
USER CALL UP
[ ]+[6]+[ACCESS CODE]+[7]
This function must be enabled by the installer. When selected, the panel will call the
downloading computer. The downloading computer must be waiting for the panel to
call before downloading can be performed.
11