DSC New Classic PC585 User Manual page 24

FCC COMPLIANCE STATEMENT
CAUTION:
Changes or modifications not expressly
approved by Digital Security Controls could void your
authority to use this equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
•
Re-orient the receiving antenna.
•
Increase the separation between the equipment and
receiver.
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/television
technician for help.
The user may find the following booklet prepared by the
FCC useful: "How to Identify and Resolve Radio/
Television Interference Problems". This booklet is
available from the U.S. Government Printing Office,
Washington D.C. 20402, Stock # 004-000-00345-4.
IMPORTANT INFORMATION
This equipment complies with Part 68 of the FCC Rules.
On the side of this equipment is a label that contains,
among other information, the FCC registration number
of this equipment.
NOTIFICATION TO TELEPHONE COMPANY The
customer shall notify the telephone company of the
particular line to which the connection will be made,
and provide the FCC registration number and the
ringer equivalence of the protective circuit.
FCC Registration Number: F53CAN-32394-AL-E
Ringer Equivalence Number: 0.0B
USOC Jack: RJ31X
TELEPHONE CONNECTION
Except for the telephone company provided ringers, all
connections to the telephone network shall be made
through standard plugs and telephone company
provided jacks, or equivalent, in such a manner as to
allow for easy, immediate disconnection of the terminal
equipment. Standard jacks shall be so arranged that, if
the plug connected
The trademarks, logos, and service marks displayed on this document are registered in the United States [or other coun-
tries]. Any misuse of the trademarks is strictly prohibited and Tyco International Ltd. will aggressively enforce its intellectual
property rights to the fullest extent of the law, including pursuit of criminal prosecution wherever necessary. All trade-
marks not owned by Tyco International Ltd. are the property of their respective owners, and are used with permission or
allowed under applicable laws. Product offerings and specifications are subject to change without notice. Actual products
may vary from photos. Not all products include all features. Availability varies by region; contact your sales representative.
© 2012 Tyco International Ltd. and its Respective Companies.
All Rights Reserved.
Toronto, Canada  www.dsc.com
Printed in Canada
protection against harmful
REQUIREMENTS
thereto is withdrawn,
interference to the operation of the equipment at the
customer's premises which remains connected to the
telephone network shall occur by reason of such
withdrawal.
INCIDENCE OF HARM Should terminal equipment or
protective circuitry cause harm to the telephone
network, the
practicable, notify the customer that temporary
disconnection of service may be required; however,
where prior notice is not practicable, the telephone
company may temporarily discontinue service if such
action is deemed reasonable in the circumstances. In
the case of such temporary discontinuance, the
telephone company shall promptly notify the customer
and will be given the opportunity to correct the situation.
ADDITIONAL
INFORMATION The security control panel must be
properly connected to the telephone line with a USOC
RJ-31X telephone jack.
The FCC prohibits
equipment be connected to party lines or to be used in
conjunction with coin telephone service. Interconnect
rules may vary from state to state.
CHANGES IN TELEPHONE COMPANY EQUIPMENT
OR FACILITIES The telephone company may make
changes in its communications facilities, equipment,
operations or procedures, where such actions are
reasonably required and proper in its business. Should
any such changes render the customer's terminal
equipment incompatible with the telephone company
facilities the customer shall be given adequate notice
to the effect modifications to maintain uninterrupted
service.
RINGER EQUIVALENCE NUMBER (REN) The REN is
useful to determine the quantity of devices that you may
connect to your telephone line and still have all of those
devices ring when your telephone number is called. In
most, but not all areas, the sum of the RENs of all devices
connected to one line should not exceed five (5.0). To
be certain of the number of devices that you may
connect to your line, you may want to contact your local
telephone company.
EQUIPMENT
experience trouble with this telephone equipment,
please contact the facility indicated below for
information on obtaining service or repairs. The
telephone company may ask that you disconnect this
equipment from the network until the problem has been
corrected or until you are sure that the equipment is not
malfunctioning.
DSC c/o APL Logistics 757 Douglas Hill Road, Lithia
Springs, GA 30122
no
telephone company
TELEPHONE
customer-provided
MAINTENANCE FACILITY
2 9 0 0 5 1 5 4 R0 0 3
shall, where
COMPANY
terminal
If you