Table of Contents
Advertisement
(C) Injecting TIREFIT Sealant into the deflated
tire:
1. Always start the engine before turning ON the TIRE-
FIT kit.
2. After pressing the Air Pump Power Button
(3), the air pump should start to inflate the tire
and the sealant (white fluid) will flow from the
Sealant Bottle (1) through the Sealant Hose (7)
and into the tire. NOTE: Some sealant may leak out
through the puncture in the tire.
WHAT TO DO IN EMERGENCIES 83
3. If the sealant Does Not Flow Through the Clear
Sealant Hose (7):
• Press the Air Pump Power Button (3) to turn OFF
the TIREFIT kit. Disconnect the Clear Sealant Hose
(7) from the valve stem. Make sure the valve stem is
free of debris. Reconnect the Clear Sealant Hose (7)
to the valve stem. Press the Air Pump Power Button
(3) to turn ON the TIREFIT kit.
• Turn the Mode Select knob to the Sealant/Air Mode.
• Connect the Power Plug (5) to a different power
outlet in your vehicle or another vehicle, if available.
Make sure the engine is running before turning ON
the TIREFIT kit.
• The Sealant Bottle (1) may be empty due to previous
use. Call for assistance.
6
Advertisement
Chapters
Table of Contents
