Operation - Dimplex DCS19W Owner's Manual

Operation

This section will describe each
convenient control, located on the
back of the stove (Figure 1).
A . Main On/Off Switch
Controls the electricity supply to
the stove and activates the
flame effect only when on.
B . Low Heat On/Off Switch
Provides 650 Watt heat output.
C . High Heat On/Off Switch
Provides 1300 Watt heat output
with the Low Heat Switch.
!
NOTE: The Main On/Off
Switch must be set to On for
the Low Heat or High Heat
Switch to operate.
The Low Heat Switch must be
in the On " I " position for the
High Heat Switch to operate.
Resetting the Temperature
Cutoff Switch
Should the heater overheat, an
automatic cut out will turn the
heater off and it will not come
back on without being reset. It
8
Figure 1
A
can be reset by switching the
Main On/Off Switch to Off and
waiting five (5) minutes before
switching the unit back on.
CAUTION: If you need to
continuously reset the heater,
unplug the unit and call
technical support at
1-888-346-7539.
B C
www.dimplex.com