Session Setup Window And Machinecontrol - DigiDesign MachineControl Manual

Session Setup Window and MachineControl

Session Format
and settings
Show/Hide button
SYNC Setup
Show/Hide button
Time Code
Settings
Figure 1. Session Setup window
The Session Setup window has three sections.
Format Displays session sample rate, bit depth,
audio format, and incoming time code values.
Lets you set Clock Source, Session Start Time,
Time Code Rate, Feet+Frames Rate, and choose a
secondary time code ruler.
SYNC Setup & Time Code Offsets Lets you set
Clock Reference and Positional Reference, Video
Reference format, and Video Input format.
Time Code Settings Lets you configure Time
Code Freewheel settings and Audio and Video
Pull Up/Down amounts.
22 MachineControl Guide
Clock Source
Freewheel settings
To show SYNC Setup and Time Code Offsets:
Click the SYNC Setup and Time Code Offsets
show/hide button.
To show Time Code settings:
Click the Time Code Settings show/hide but-
ton.
External
Time Code
Offsets
Sample
offset
Pull Up/
Pull Down
settings