DigiDesign MachineControl Manual page 20

Remote Mode
In Remote 9-Pin Deck Emulation mode, you put
Pro Tools in Remote mode to enable Machine
Control operation.
When you put Pro Tools in Remote mode, it
responds to commands sent by the master 9-Pin
machine. Many Pro Tools commands, including
transport controls, are inactive in the Transport
window.
When you take Pro Tools out of Remote
mode, it operates in Local mode and ignores
commands from the 9-pin machine controller.
Pro Tools responds only to requests from the
9-pin machine controller for machine type and
status, and returns that it is in Local mode.
To put Pro Tools in Remote mode:
Choose View > Transport > Synchronization.
1
Click the Remote button in the Transport win-
2
dow.
Remote button in the Transport window
For more information on Remote mode in
Pro Tools, see Chapter 6, "Remote 9-Pin Deck
Emulation Mode (Configuration and Opera-
tion)."
16 MachineControl Guide
Remote button