Table of Contents
Advertisement
Quick Links
TECHNICAL
TECHNICAL
T
T
E
L
E
E
L
E
Compact Video Entry Phones Available in Five Finishes
"Brushed Stainless Steel"
(similar to brushed nickel) Shown with
optional VE-3x5 box (not included)
The E-50 Series Video Entry phones are compact, weather and vandal resistant speaker phones designed to provide two-way hands-
free audio communication and color composite video of who is at your door or gate. The E-50's compact size allows it to be mounted
in a standard single gang electrical box. The E-50 is available in five different attractive finishes to match your door hardware, light fix-
tures, etc. Replacement E-50 faceplates (PNL50) can be purchased separately and are available in all five standard finishes. The E-
50's blue LED continually provides light for locating the push button in dark locations, dims to indicate off hook and flashes dur-
ing incoming ring. Note: LED not available on all models. Contact Viking for more information. The E-50 entry phones can share
a single phone line with house or small business telephones when used with a Viking model C-200, C-250 or C-2000B Entry Phone
controller. The E-50 entry phones can also be connected to an unused analog station port (programmed for ring down) on a phone sys-
tem or connected directly to a telephone line when used with a Viking model K-1900-5 or K-1900-30 auto dialer. The E-50 features
a built-in high resolution color video camera, microphone and speaker volume controls, selectable auto answer for monitoring and intel-
ligent call progress detection for automatic hang-up when the call is completed. For outdoor installations where the unit is exposed
to precipitation or condensation, the E-50 Series is available with Enhanced Weather Protection (EWP), see DOD# 859.
F
e
a
t
u
r
e
s
F
e
a
t
u
r
e
s
• Built-in high resolution color video camera with wide viewing, tilt/swivel
adjustments, and wide operating temperature of -30° F to 150° F
• Audio and video transmission on one CAT5E cable (see page 5)
• Compact size: Front panel is the size of a typical single gang midsize wall
plate
• Mounting: Flush mount in a single gang electrical box (2.25" deep x 2.00"
wide x 2.84" tall min) electrical box or surface mount in a Viking model VE-3x5
(not included - DOD# 424)
• Available in 5 standard faceplate finishes: Brushed Stainless Steel,
Oil Rubbed Bronze, Polished Brass, Satin White and Satin Black
• PNL-50 faceplates: Replacement faceplates with matching screws
available in all five standard finishes
• Vandal Resistant Features: 16 gauge polished brass or 18 gauge 304
stainless steel faceplate, 316 stainless steel push button, carbon fiber
reinforced plastic speaker screen, scratch resistant powder coating, impact
and scratch resistant camera lens, and hex drive mounting screws
• Weather Resistant Features: Mylar speaker, faceplate gasket, mic and
speaker gasket, internally sealed (IP67) push button switch, sealed camera
lens, potted camera circuit board, stainless steel phone and camera mounting
hardware and UV stable weather resistant powder coating (excluding E-50-SS)
• E-50-EWP is designed to meet IP66 Ingress Protection Rating (see DOD# 859)
• Microphone and speaker volume controls
• Programmable Intelligent call progress detection for automatic hang-up on
CPC, silence, busy signal, or time out
• Selectable auto answer feature for monitoring
• Programmable VOX (mic/speaker) switching speed
• Blue LED helps located push button, indicate ringing and off-hook
S
S
C
O
M
O
L
U
T
I
O
N
S
C
O
M
O
L
U
T
I
O
N
S
E-50-SS
E-50-BN
"Oil Rubbed Bronze"
(satin dark brown powder
paint with fine copper metallic)
P
r
a
c
P
r
a
c
2
1
C
2
1
C
F
O
R
T
H
E
S
T
F
O
R
T
H
E
S
T
E-50-PB
"Polished Brass"
(with clear gloss powder
paint to prevent tarnishing)
A
p
p
l
i
A
p
p
l
• Door or gate communication, business delivery entrances
• Use with a Viking C-200 or C-250 to control one E-50 on a single
phone line
• Use with a Viking C-2000B to control 1 to 4 E-50's and door/gate
control on a single phone line
• Provide unique front and back door chimes and paging when used
with a Viking SLP-1, SLP-4 and C-2000B
• Use with a Viking K-1900-5 or K-1900-30 for automatic speed
dialing on telephone lines or analog PABX/KSU station ports
• Use on an analog PABX station port with programmable ringdown
capability
S
p
e
c
S
p
e
c
Dimensions: Faceplate: 123.8mm x 79.4mm x 4.6mm (4.875" x 3.125" x 0.18"),
Phone Board: 72mm x 46mm x 42mm (2.84" x 1.8" x 1.65")
Shipping Weight: 0.45 kg (1.0 lbs)
Operating Temperature: -34° C to 65° C (-30° F to 150° F)
Connections: (5) gel-filled butt connectors (3M Scotchlok UR2)
(See page 2 for complete specifications)
E-50 Series
E-50 Series
Compact Entry Phones
t
i
c
e
t
i
c
e
with Color Video Camera
August 29, 2012
E
N
T
U
R
Y
E
N
T
U
R
Y
E-50-WH
"Satin White"
(satin white powder paint)
c
a
t
i
o
n
s
i
c
a
t
i
o
n
s
P
h
o
n
e
.
.
.
P
h
o
n
e
.
.
.
w
w
w
.
v
i
k
i
n
g
e
l
w
w
w
.
v
i
k
i
n
g
e
l
i
f
i
c
a
t
i
o
n
s
i
f
i
c
a
t
i
o
n
s
E-50-BK
"Satin Black"
(fine texture satin black
powder paint)
7
1
5
.
3
8
6
.
8
8
6
1
7
1
5
.
3
8
6
.
8
8
6
1
e
c
t
r
o
n
i
c
s
.
c
o
m
e
c
t
r
o
n
i
c
s
.
c
o
m
Advertisement
Table of Contents
Related Manuals for Viking E-50-BK
Summary of Contents for Viking E-50-BK
- Page 1 Note: LED not available on all models. Contact Viking for more information. The E-50 entry phones can share a single phone line with house or small business telephones when used with a Viking model C-200, C-250 or C-2000B Entry Phone controller.
-
Page 2: Limited Warranty
Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of one year from the date of purchase from any authorized Viking distributor or 18 months from the... - Page 3 The E-50 is designed to be flush mounted into a standard single gang rough-in box with minimum inside dimensions of 2.25” deep x 2.00” wide x 2.84” tall. The E-50 can also be surface mounted in a Viking model VE-3x5 (not included, see DOD# 424).
-
Page 4: Surface Mounting
*** Note: Talk battery must be a minimum of 28V DC when using the speaker phone with a Viking K-1900-5 Dialer (DOD# 317) or K-1900-30 Multi-Number Dialer (DOD# 300). **** Note: When installing a line powered phone on a low voltage and/or low loop current phone system extension, a Viking TBB-1B Talk Battery Booster may... -
Page 5: Adjusting The Camera
** Note: The maximum camera power supply wire run length is 250 ft of 24 gauge wire (CAT 5/6), longer runs are possible by doubling pairs, increas- ing the wire gauge or using a 6V DC 200mA power adapter (Viking part # L122110). Go to www.vikingelectronics.com and click on “Spare Parts”. -
Page 6: Adjusting Speaker Volume
(vertically rotated 90 degrees) to correct the video image orientation. An additional cam- era “L” bracket (Viking model LB-50) is required to reposition the camera. To purchase LB-50 contact your local Viking distributor. - Page 7 D. Accessing the Programming Mode The E-50 can be programmed from any Touch Tone phone using a telephone line, Viking model C-200, C-250 or C- 2000B Entry Phone Controller, analog PABX/KSU station or a Viking model DLE-200B Line Simulator. Step 1. Move DIP switch 1 to the ON position (sets unit to answer incoming calls - see section C).
- Page 8 (Example: Back Door) Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.