Volvo 960 Owner's Manual page 96

1996 Volvo 960
Programming the memory
Three seat positions can be programmed. To program a seat position:
1. Adjust the seat to the desired position.
2. Depress the MEM button.
3. Press button 1 to program the current position of the seat.
Buttons 2 and 3 can be programmed in the same way for two additional seat positions. To move the seat
to a programmed position, depress button 1, 2 or 3 until the seat stops. If the button is released before the
seat has the reached the programmed position, it will stop as a safety precaution.
pg. 2:5 Rear-/side-view mirrors, Vanity mirrors
Rear-view mirror
A Normal position
file:///K|/ownersdocs/1996/1996_960/96960_201.htm (7 of 11)12/30/2006 10:12:47 AM