Vivotek IP8330 User Manual page 131

trigger boot,
di,
motion,
seq,
recnotify,
tampering,
triggerstatus String[40]
di <integer>
mdwin <integer>
mdwin0 <integer>
inter 1~999
weekday 0~127
begintime hh:mm
endtime hh:mm
action_cf_enable 0. 1
action_cf_folder string[128]
action_cf_media NULL, 0~4
action_cf_datefolder <boolean>
6/6 Indicate the trigger condition:
"boot" = System boot
"di"= Digital input
"motion" = Video motion detection
"seq" = Periodic condition
"recnotify" = Recording notification.
"tampering" = Tamper detection.
6/6 The status for event trigger
6/6 Indicate the source id of di trigger.
This field is required when trigger condition is "di".
One bit represents one digital input. The LSB indicates DI 0.
6/6 Indicate the source window id of motion detection.
This field is required when trigger condition is "md".
One bit represents one window.
The LSB indicates the 1
For example, to detect the 1
as 5.
6/6 Similar to mdwin. The parameter takes effect when profile 1
of motion detection is enabled.
6/6 Interval of snapshots in minutes.
This field is used when trigger condition is "seq".
6/6 Indicate which weekday is scheduled.
One bit represents one weekday.
bit0 (LSB) = Saturday
bit1 = Friday
bit2 = Thursday
bit3 = Wednesday
bit4 = Tuesday
bit5 = Monday
bit6 = Sunday
For example, to detect events on Friday and Sunday, set
weekday as 66.
6/6 Begin time of the weekly schedule.
6/6 End time of the weekly schedule.
(00:00 ~ 24:00 sets schedule as always on)
6/6 Enable media write on CF or other local storage media
6/6 Path to store media.
6/6 Index of the attached media.
6/6 Enable this to create folders by date, time, and hour
automatically.
st
window.
st rd
and 3 windows, set mdwin
User's Manual - 131
VIVOTEK