Vivotek IP8330 User Manual page 128

Bullet network camera
Hide thumbs Also See for IP8330:
Table of Contents

Advertisement

VIVOTEK
eptz
npreset
protocol_https
protocol_rtsp
protocol_sip
protocol_maxconnec
tion
protocol_maxgenco
nnection
protocol_maxmegac
onnection
protocol_rtp_multic
ast_scalable
protocol_rtp_multic
ast_backchannel
protocol_rtp_tcp
protocol_rtp_http
protocol_spush_mjp
eg
protocol_snmp
protocol_ipv6
videoin_type
128 - User's Manual
<positive integer>
0/7
<positive integer>
0/7
< boolean >
0/7
< boolean >
0/7
<boolean>
0/7
<positive integer>
0/7
<positive integer>
0/7
<positive integer>
0/7
<boolean>
0/7
<boolean>
0/7
<boolean>
0/7
<boolean>
0/7
<boolean>
0/7
<boolean>
0/7
<boolean>
0/7
0, 1, 2
0/7
Bit 6 => Support iris operation;
0(not support), 1(support)
Bit 7 => External or built-in PT; 0(built-in),
1(external)
Bit 8 => Invalidate bit 1 ~ 7;
0(bit 1 ~ 7 are valid),
1(bit 1 ~ 7 are invalid)
Bit 9 => Reserved bit; Invalidate lens_pan,
Lens_tilt, lens_zoon, lens_focus, len_iris.
0(fields are valid),
1(fields are invalid)
A 32-bit integer, each bit can be set separately
as follows:
Bit 0 => stream 1 supports ePTZ or not.
Bit 1 => stream 2 supports ePTZ or not.
The rest may be deduced by analogy
Number of preset locations.
Indicate whether to support HTTP over SSL.
Indicate whether to support RTSP.
Indicate whether to support SIP.
The maximum allowed simultaneous
connections.
The maximum general streaming connections.
The maximum megapixel streaming
connections.
Indicate whether to support scalable multicast.
Indicate whether to support backchannel
multicast.
Indicate whether to support RTP over TCP.
Indicate whether to support RTP over HTTP.
Indicate whether to support server push MJPEG.
Indicate whether to support SNMP.
Indicate whether to support IPv6.
0 => Interlaced CCD
1 => Progressive CCD
2 => CMOS

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ip8332

Table of Contents