Visonic PowerMaxExpress Quick Reference Manual page 5

Network APN
O2 mobile.o2.co.uk
Vodafone pp.vodafone.co.uk
Orange orangewap
Orange orangeinternet
T Mobile general.t-mobile.uk
L The APN's above are provided by the network provider
for public use. Visonic is not responsible for network
availability at any time.
•
Press , when finished then press
repeat for the user name.
•
Press , when finished then press
repeat for the GPRS password.
•
Press HOME then
Reporting' press .
•
At 'Report Event' press
'All * Backup' or 'All (-op/oc)*backup' if open close signals
are not required. Press
•
Press until 'Receiver 1 account' is shown then press
. Enter you account number here with prefix of '00' for 4
digit accounts. Press
•
Press and repeat for the second account number if
applicable.
•
Press until 'IP RCVR' is displayed, then press
the IP address of the central station using the table below
or by contacting the central station directly. Note that the IP
address must be entered in long format i.e. 81.3.124.1 should
be entered as 081.003.124.001. Press
•
Press and repeat for 'IP RCVR 2' if applicable.
•
Press until 'GPRS UL/DL', press
enter the SIM telephone number in to the 'My SIM Tel.' menu.
Press ,
.
GPRS setup is now complete.
Central Primary
Station IP Address
East Midlands
Central Station 082.003.050.121
(EMCS)
G4S Contact 0871 246 0080 for information
Locked Up
081.142.093.090
Monitoring
Northern
081.149.098.101
Monitoring
Southern
081.138.161.164
Monitoring
Visonic UK Test
087.254.016.010
Receiver
User Name Password
Web Web
Web Web
Orange Multimedia
User Pass
User or wapuser Wap
and the display shows '3. C.S.
then press to select either
, to confirm.
,
.
.
,
Secondary Engineers contact
IP Address phone no.
081.134.193.037 0844 80 99980
081.142.93.91 01642 236990
0844 871 2223
0844 871 2223
GSM Reporting to Central Station
•
Within the installer mode press
Comm' then press
•
Press until 2.GPRS/BB is shown then press
•
Press until 'GSM report' then press
•
Press until 'GSM report enable' the
•
Press HOME then
Reporting' press
•
At 'Report Event' press
'All * Backup' or 'All (-op/oc)*backup' if open close signals are
and
not required. Press
•
Press
and
. Enter your account number here with prefix of '00' for
4 digit accounts. Press
•
Press
applicable
•
Press
Enter the full central station telephone number including any
prefix for an outside line and STD code. Press
•
Press and repeat for PSTN/GSM Receiver 2 if applicable.
•
GSM setup is now complete
Configuring Dual-path Reporting
PowerMaxExpress can be configured as dual or even triple path
. Enter
reporting to comply with insurance requirements. Initially you
will need to configure each path:-
•
GPRS / GSM – follow the instructions above to enable the
communications paths
•
PSTN (standard phone line) – ensure the account numbers and
, then
PSTN receiver numbers are entered as per the instructions in
GSM reporting. You must also enable the PSTN line fault option
in Define Comm – 3.CS Reporting (see manual for more details)
Reporting paths are enabled in the Define Comm menu. Once
there:-
•
Press until 3.CS Reporting then press
•
Press until '1st Report Method' press
•
Press
Cellular (GSM/GPRS) press
•
Press and repeat for the second report method
•
Press and repeat for the third method if required.
When selecting Cellular the PowerMax will always choose GPRS
first provided it is configured and available.
L For GPRS / GSM reporting you must ensure the SIM card is
configured for voice and data access
PowerMaxExpress can also communicate using broadband/
ADSL using a Powerlink module. Ask your distributor or a
Visonic representative for more details.
Q u i ck Refe ren ce G u id e
until you see 'Define
.
and the display shows '3. C.S.
.
then press
, to confirm.
until 'Receiver 1 account' is shown then press
,
.
and repeat for the second account number if
until PSTN/GSM Receiver 1 then press
to select the first reporting path i.e. PSTN or
,
.
.
,
.
to select either
.
,
.
.
.
.