Controlling Your Cameras - Visonic PowerLink User Manual

Controlling Your Cameras

This allows you to control and view enrolled PowerLink cameras from your cellular
phone.
1. From the main menu, select Camera. The Camera screen appears.
Click on the zone name where the camera
you want to view is located.
Click on the Mini View to open the larger
camera feed (additional controls are
located here). Click on the camera
numbers at the bottom of the page to
view other cameras in this zone.
Click on the zone name to return to the
zone list.
Click on the camera name you want to
view.
Mini
View
Additional
Cameras
Here you can set the view refresh rate.
The image size link allows you to change
the size of the viewed image.
Start Show enables you to view the
camera.
Alarm View switches to alarm images
viewing mode.
61
Cellular Web Interface
Refresh
Image Size
Alarm
Images