Step 2: Connection Setup; Step 3: Home Devices Customization - Visonic PowerLink User Manual

Step 2: Connection Setup

1. In the left frame of the Visonic PowerLink window click SETUP.
2. Click the NETWORK tab.
3. Copy the SSID from the Visonic PowerLink Installation Form (see appendix
A).
4. Choose your wireless encryption method
5. In the Encryption Key field type the Key String according to the Visonic
PowerLink Installation Form (Appendix A).
6. Click Apply.

Step 3: Home Devices Customization

You need to select a type and define a name for each Home Automation device
enrolled in your PowerMax+ / PowerMax PRO Control Panel.
We recommended that you define the name of a device so it helps identifying it.
Skip this step if you do not have any Home Automation devices enrolled into the
system.
1. In the left frame of the Visonic PowerLink window click SETUP.
2. Click the HOME DEVICES tab.
3. In the Set Device Name And Type screen you can:
Type a new name in the DEVICE NAME field.
- or -
Click the arrow
type.
next to the TYPE field and in the window click a device
21
Installing the Visonic PowerLink
Connection Setup
Parameters