Viessmann KOB Pyrot KRT Series Technical Data Manual page 40

Commissioning
Fuel for the commissioning
For the commissioning, sufficient dry fuel (max. W 20%)
should be stored for approx. 10-24 full operating hours:
PYROT 150
PYROT 220
PYROT 300
PYROT 400
PYROT 500
Since the boiler plant will be cold, and residual moisture
will be drawn from the refractory concrete during the
initial operation, the material to be burned for the initial
operation has to be at least air dry. For the first three hours,
the heating-up process should be carried out at low output.
To ensure that the silo extraction system is functioning
properly, only place a minimal amount of fuel in the silo
in case there is a problem. This enables the extraction
system to be cleaned out quickly and the problem to be
identified and corrected.
approx. 2640 lb.
approx. 3300 lb.
approx. 4400 lb.
approx. 5500 lb.
approx. 6600 lb.
Pyrot Technical Data