Table of Contents
Advertisement
6
Limitation of Damages and Implied Warranties
On-Site Service
If NECAM requires and authorizes on-site service for your
repair, a qualified technician will arrive at your location on the
Next Business Day from the time of dispatch. If you are
located outside of a service coverage area, travel charges will
be applied.
All parts or systems returned to NECAM must be accompanied
with an RMA (Return Material Authorization) number. To
obtain an RMA number for product return, please contact the
SigmaBlade Server Technical Support line at: 1-866-269-1239
NEC Corporation of America's sole liability for any defective
product is limited to the repair or replacement of the product
at our option. NEC Corporation of America shall not be liable
for:
1. Damage to other property caused by any defects in this
product, damages based upon inconvenience, loss of use of
the product, loss of time or data, commercial loss; or
2. Any other damages of any kind.
NEC CORPORATION OF AMERICA MAKES NO OTHER
EXPRESS WARRANTY WITH RESPECT TO THIS
PRODUCT. ANY IMPLIED WARRANTIES, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS, ARE LIMITED IN
DURATION TO THE TERM OF THE EXPRESS
WARRANTY STATED HEREIN. LIABILITY FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES UNDER
ANY WARRANTIES IS EXCLUDED TO THE EXTENT
PERMITTED BY LAW.
Note:
Some states and provinces do not allow the exclusion
or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. Some
states do not allow limitations on ho w long an implied
warranty lasts, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may also
have other rights that vary from state to state and province to
province.
Note:
All Products returned to NEC Corporation of America
for service MUST have prior approval. This may be obtained
by calling 1-866-269-1239.
Advertisement
Table of Contents
