Toshiba TECRA M5 User Manual page 159

HDD Priority Options
If more than one HDD is installed in the computer, this option lets you set
the priority for HDD detection. If the first detected HDD has a boot
command, the system will boot from the HDD.
Built-in HDD ->
2nd HDD -> USB
(Default)
2nd HDD -> Built-
in HDD -> USB
Built-in HDD ->
USB -> 2nd HDD
2nd HDD -> USB ->
Built-in HDD
USB -> Built-in
HDD -> 2nd HDD
USB -> 2nd HDD ->
Built-in HDD
■
If a boot command is not found on the first detected HDD, the system
will not boot from the other HDD. It will search the next device in the
boot priority for a boot command.
■
Some modules may not be displayed.
USB Memory BIOS Support Type
Set the type of the USB memory as a startup device.
HDD
FDD
User's Manual
The priority is set as built-in HDD -> 2nd HDD ->
USB.
The priority is set as 2nd HDD -> built-in HDD ->
USB.
The priority is set as built-in HDD -> USB -> 2nd
HDD.
The priority is set as 2nd HDD -> USB -> built-in
HDD.
The priority is set as USB -> built-in HDD -> 2nd
HDD.
The priority is set as USB -> 2nd HDD -> built-in
HDD.
Set the type of the USB memory to be equivalent
to the HDD (Default).
* Based on the [HDD] order in the [Boot Priority
Options] item. The order with respect to the other
HDD can be set in the [HDD Priority Options]
item.
Set the type of the USB memory to be equivalent
to the FDD.
* Based on the [FDD] order in the [Boot Priority
Options] item.
HW Setup
7-5